| Customization: | Available |
|---|---|
| Customized: | Customized |
| Standard Component: | Standard Component |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ROCKY Air Dryer Manufacturer 220V 60HZ Marine Refrigeration Dryer TR01
1. Energy saving. Aluminum alloy three-in-one heat exchanger design, under the same processing capacity, the total input power is reduced by 15-50%.
2. High efficiency. Guide fins are added to the integrated heat exchanger to make the compressed air uniform inside
3. Intelligent. Multi-channel temperature and pressure monitoring, real-time display of dew point temperature, self-diagnosis function, automatic protection of equipment.
4. Environmental protection. This series of models all use R134a and R410a environmentally friendly refrigerants, and the degree of damage to the atmosphere is zero.
5. Stable. Standard constant pressure expansion valve, intelligent temperature control, stable operation even when the intake air temperature reaches 65°C and the ambient temperature reaches 42°C.
Compressor system
The use of a fully-enclosed compression refrigeration system reduces the temperature of the low-pressure gas and cools it, causing a large amount of saturated water vapor and oil mist contained therein to condense into droplets, which are discharged by an automatic drain after air-water separation.
Professional Air Cooling Refrigerated Air Dryer for Air Compressor
The water condenser is a high-quality, low-wing copper tube with slow water flow and multiple strokes. It has high heat exchange efficiency and is not suitable for scaling in long-term use.The automatic drainer is set on demand, with the addition of water and energy saving.
Professional Air Cooling Refrigerated Air Dryer for Air Compressor
The equipment structure is reasonable in design, easy to maintain and maintain; the surface is hot-sprayed, with beautiful appearance, no rust; no basic installation, stable operation and no vibration, low maintenance rate, no consumables, low operating cost, no need for special personnel to wait for continuous operation.
Professional Air Cooling Refrigerated Air Dryer for Air Compressor
The cooling control element has excellent performance, with the function of throttling and pressure reduction of the thermal expansion valve, energy regulation function of the hot gas bypass valve, over current, overload, and high and low voltage protection of the refrigerant.
Technical Parameter
| Model | TR01 | TR02 | TR03 | TR06 | TR08 | TR10 | TR12 | |
| Capacity | m3/min | 1.2 | 2.4 | 3.6 | 6.5 | 8.5 | 10.5 | 13 |
| Power supply | 220V 1PH 50HZ/60HZ | |||||||
| Input power | kW | 0.37 | 0.52 | 0.735 | 1.26 | 1.87 | 2.43 | 2.63 |
| Air pipe connection | RC3/4" | RC1" | RC1-1/2" | RC2" | ||||
| Evaporator type | Aluminum alloy plate | |||||||
| Refrigerant model | R134a | R410a | ||||||
| Display Anti-freezing protection | LED dew point display, LED alarm code display, operation status indication Constant pressure expansion valve & compressor automatic start /stop | |||||||
| Temperature control | Automatic control of condensing temperature / dew point temperature | |||||||
| High voltage protection | Temperature sensor | Temperature sensor&lnductive intelligent protection | ||||||
| Low voltage protection | Temperature sensor&lnductive intelligent protection | |||||||
| Weight | Kg | 34 | 42 | 50 | 63 | 73 | 85 | 94 |
| Dimension | L | 480 | 520 | 640 | 700 | 770 | 770 | 800 |
| W | 380 | 410 | 520 | 540 | 590 | 590 | 610 | |
| H | 665 | 725 | 850 | 950 | 990 | 990 | 1030 | |
Ambient temperature : 38°C,Max.42°C
Inlet temperature : 38°C,Max.65°C
Working pressure : 0.7MPa,Max.1.6MPa
Pressure dew point: 2°C~10°C (Atmospheric dew point: -23°C~ -17°C)
Installation request: Avoid direct sunlight & rain, good ventilation, Install horizontally on the hard ground, no dust and fluu etc.
1. Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)
Shanghai Rocky Machinery Co., Ltd. is a company dedicated to the production and research and development of various gas compression equipment. The company was established in 2012 and has a total of 5 licensed technical engineers. Mainly engaged in air, nitrogen, CO2 and other special gas compression equipment and after-treat equipment. With the development in recent years, the company has established a foreign trade team in Shanghai, and hired foreign trade consultants with 10 years of industry experience to better serve customers worldwide. With excellent quality and the support of 30 distributors worldwide, our annual sales in 2018 exceeded 5 million US dollars. We look forward to working with you to create a better tomorrow!
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of Taicang,Jiangsu,China. More than 18 years of experience in air compressor manufacturing.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
){kind=link}