| After-sales Service: | Online Support |
|---|---|
| Warranty: | 24 Months |
| Lubrication Style: | Oil-free |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Piston oxygen booster compressor A safety oxygen compressor for pressurizing oxygen and delivering or storing it. One of these industries is used for rough oxygen cutting, where 93% pure oxygen is pumped into oxygen cylinders and acetylene gas is used to cut scrap metal. Cylinder filling oxygen compressors serve two purposes. One is that the hospital's PSA oxygen generator needs to be pressurized to supply various wards and operating rooms, providing a line pressure of 7-10 kg, and the other is the need to store PSA oxygen. High-pressure containers are convenient for mobile use, and the storage pressure is usually 100barg, 150barg, 200barg or higher 300barg pressure. This cylinder filled oxygen compressor is suitable for inlet pressure 3-4barg (40-60psig) and discharge pressure 150barg (2150psig)
1.Touch display PLC control.
2.Remote control is optional.
3.Inlet and outlet pressure overload,temperature overheating,cooling water failure, circulation rolling alarm and stop.
4.Operation time display, maintenance cycle prompt.
5.With water tank and circulating pump without external pipeline, filling antifreeze at low temperature without obstruction.
| Compressed media | Nitrogen/Oxyen (must be dry and particle free) |
| Model | SWY-150/4-16 |
| Rated flow (standard state) | 120Nm3/h |
| Intake pressure | 0.4Mpa |
| Exhaust pressure | 1.6Mpa |
| Engine speed | 470r/min |
| Cooling mode | Air cooling |
| Lubrication method | Fully oil-free lubrication |
| Compression series | 2 |
| Structural type | Angle type, V type |
| Motor power | 15kw |
| Transmission mode | Belt drive |
| Installation type | Basic type |
| Dual pressure controller | Intake 4-6 |
| Control mode | Completely oil-free lubrication, air cooling, reciprocating piston type |
| Size of inlet and outlet | RC1" |
| Dimensions | 1250*900*1480mm |
| Compressed media (General for oxygen and nitrogen) |
Model | Capacity (Nm3/h) |
Intake pressure (MPa) |
Exhaust pressure (MPa) |
Power (kW) |
Dimensions (mm) |
| Oxygen/Nitrogen | VW-0.33/5-25 | 20 | 0.5 | 2.5 | 4 | 1220*500*800 |
| Oxygen/Nitrogen | ZWN-3.6/4-8 | 3.6 | 0.4 | 0.8 | 0.75 | 750*500*650 |
| Oxygen/Nitrogen | VWN-10/5-25 | 10 | 0.5 | 2.5 | 4 | 1600*700*1500 |
| Oxygen/Nitrogen | VWN-60/5-16 | 60 | 0.5 | 1.6 | 5.5 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-20/6-20 | 20 | 0.6 | 2.0 | 4 | 1250*600*900 |
| Oxygen/Nitrogen | VWN-20/5-25 | 20 | 0.5 | 2.5 | 4 | 1050*600*1000 |
| Oxygen/Nitrogen | VWN-40/7-25 | 40 | 0.7 | 2.5 | 4 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-60/4-25 | 60 | 0.4 | 2.5 | 11 | 1250*700*900 |
| Oxygen/Nitrogen | WWN-80/4-25 | 80 | 0.4 | 2.5 | 11 | 1350*700*1200 |
| Oxygen/Nitrogen | VWN-80/7-25 | 80 | 0.7 | 2.5 | 7.5 | 1250*700*900 |
| Oxygen/Nitrogen | VWN-60/4-30 | 60 | 0.4 | 3.0 | 3 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-50/4-30 | 50 | 0.4 | 3.0 | 7.5 | 1250*650*1000 |
| Oxygen/Nitrogen | VWN-80/5-30 | 80 | 0.5 | 3.0 | 11 | 1250*700*1000 |
| Oxygen/Nitrogen | VWN-30/5-35 | 30 | 0.5 | 3.5 | 5.5 | 1050*500*1000 |
| Oxygen/Nitrogen | VWN-50/5-35 | 50 | 0.5 | 3.5 | 7.5 | 1050*700*1000 |
| Oxygen/Nitrogen | VWN-40/5-40 | 40 | 0.5 | 4.0 | 7.5 | 1250*600*900 |
| Oxygen/Nitrogen | VWY-80/0.5-50 | 80 | 0.05 | 5.0 | 18.5 | 1250*700*900 |
| Oxygen/Nitrogen | VWND-55/5-8 | 55 | 0.5 | 0.8 | 4 | 1400*810*1300 |
| Oxygen/Nitrogen | VWN-60/5-10 | 60 | 0.5 | 1.0 | 4 | 1250*500*900 |
| Oxygen/Nitrogen | VWY-75/4-16 | 75 | 0.4 | 1.6 | 7.5 | 1050*500*1000 |
| Oxygen/Nitrogen | VWND-100/5-10 | 100 | 0.5 | 1.0 | 5.5 | 1400*930*1350 |
| Oxygen/Nitrogen | VWN-120/6-16 | 120 | 0.6 | 1.6 | 11 | 1250*700*1000 |
| Oxygen/Nitrogen | VWN-140/5-8 | 140 | 0.5 | 0.8 | 5.5 | 1250*600*900 |
| Oxygen/Nitrogen | WWND-150/4-10 | 150 | 0.4 | 1.0 | 11 | 1430*1030*1350 |
| Oxygen/Nitrogen | SWND-240/4-10 | 240 | 0.4 | 1.0 | 15 | 1500×1100×1620 |
| Oxygen/Nitrogen | VWY-120/5-10 | 120 | 0.5 | 1.0 | 7.5 | 1250*600*1000 |
| Oxygen/Nitrogen | SWY-150/4-16 | 150 | 0.4 | 1.6 | 15 | 1250*900*1480 |
| Oxygen/Nitrogen | WWN-100/4-25 | 100 | 0.4 | 2.5 | 15 | 1350*700*1200 |
| Oxygen/Nitrogen | WWN-120/6-30 | 120 | 0.6 | 3.0 | 15 | 1250*800*1200 |
| Oxygen/Nitrogen | WWN-120/6-45 | 120 | 0.6 | 4.5 | 18.5 | 1350*1100*1100 |
| Oxygen/Nitrogen | WWN-80/5-45 | 80 | 0.5 | 4.5 | 15 | 1350*700*1200 |
| Oxygen/Nitrogen | WWN-240/5-10 | 240 | 0.5 | 1.0 | 15 | 1350*800*1200 |
| Oxygen/Nitrogen | WWN-300/0.5-8-II | 300 | 0.05 | 0.8 | 22*2 | 2500*1200*800 |
| Oxygen/Nitrogen | WWNFB-900/4-8-II | 900 | 0.4 | 0.8 | 22*2 | 2600*1000*900 |
| Oxygen/Nitrogen | VWN-180/5-25-II | 180 | 0.5 | 2.5 | 11*2 | 1500*1350*1100 |
| Oxygen/Nitrogen | WWN-200/3-18-II | 200 | 0.3 | 1.8 | 11*2 | 1450*1350*1100 |
| Oxygen/Nitrogen | WWN-200/6-30-II | 200 | 0.6 | 3.0 | 11*2 | 1600*1600*1200 |
| Oxygen/Nitrogen | WWFB-430/4-9 | 430 | 0.4 | 0.9 | 22 | 1500*1000*800 |
Application industrIndustrial applications for oxygen compressors include booster use of low pressure oxygen for VSA applications in steel mills, paper mills and water treatment plants.
FAQ:
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of Taicang,Jiangsu,China. More than 18 years of experience in air compressor manufacturing.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}