| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 24months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
M type large natural gas station compressor
Large compressor types are divided into: symmetrical balance type, M type.
The middle body between the slideway and the cylinder can be designed with a long-shaped single-chamber, a short-shaped single-chamber, an extended-shaped double-chamber, and a long-short dual-chamber structure according to user requirements; it adopts a water-cooling system, and all levels are equipped with intake and exhaust buffers There are two sets of lubricating systems. When the oil pressure is low, the auxiliary oil pump system automatically starts to run. All equipment is integrated on the skid-mounted base, which has the characteristics of compact structure, good sealing performance, small starting torque, good inertia force balance, small mechanical vibration, high reliability, easy maintenance, and long service life.
Lubrication method: 1. Without oil 2. With oil
Cooling method: 1. Water cooling 2. Air cooling 3. Mixed cooling (selected according to actual needs)
Overall structure: fixed, mobile, skid-mounted, soundproof cabin, etc. (selected according to actual needs)
In addition to the functions of a standard station, the CNG refueling mother station also fills compressed natural gas into a high-pressure gas transport semi-trailer (referred to as a semi-trailer) through the refueling column located in the station, and transports it to the refueling sub-station to refuel the vehicle. At the same time, as an effective supplement to pipeline gas transmission, in small and medium-sized cities far away from natural gas pipelines, semi-trailers can be used to transport compressed natural gas by road to the cities where it is used. Other natural gas users supply gas.
The company can independently design, manufacture and produce various types of compressors according to user requirements, and provide users with high-quality pre-sale, in-sale and after-sale services.
| 1 | Compressor type | MA-5.33/5.5-60 | |||
| 2 | Structure | M-type, horizontal symmetrical balance | |||
| 3 | Rotating speed | 988rpm | |||
| 4 | Compression stage | 3 | |||
| 5 | Medium | Natural gas | |||
| 6 | Final discharge pressure | 60bar | |||
| 7 | Inlet pressure bar | 5.5 | |||
| 8 | Discharge capacity Nm3/h | 5900 | |||
| 9 | Shaft power KW | 550 | |||
| 10 | Discharge temperature | 15 ºC not higher than the environmental temperature | |||
| 11 | Main motor | Power | Voltage | Explosion -proof grade | Protection grade |
| 600KW | 380V | ExdIIBT4 | IP55 | ||
| 12 | Reverse angle | 156 degree | |||
| 13 | Peak-to-valley ratio of piston force | 44 % | |||
| 14 | Cooling type | Gas: air cooling , cylinder: non-cooling | |||
| 15 | Drive type | direct-connected drive through diaphragm coupling(no flywheel) | |||
| 16 | Lubrication type | Oil-less | |||
| 17 | Installation mode | Skid mounted | |||
| 18 | Control type | PLC + touch screen + soft-start | |||
| 19 | Dimensions(LxWxH) | 7000x2700x2200mm | |||
| 20 | Weight | 18000kg(about) | |||
Shanghai Rocky Machinery Co., Ltd. was established in 2003 and has 18 years of experience in the air compressor industry. It is an innovative enterprise integrating production, trade, service, research and development.
We are professional gas compressors manufacturer since 2003, Germany standard, more than 100 workers, annual sales exceeding 20 million US dollars with 13 years of exporting experience, strict quality control and delivery on time. We not only supply gas compressor including screw air compressor, but also supply spares parts and after-treat machines.
Our main products series as follows.
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of Taicang,Jiangsu,China. More than 18 years of experience in air compressor manufacturing.Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
){kind=link}