| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 2year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Low Noise 10bar 75kw 100HP Water Lubricated 3 Phase AC Power Permanet Magnet Variable Speed Drive Oil Free Single Rotary Screw Air Compressor
Model: RW-75A/W
Type: oil free water lubrication screw air compressor
Screw type: Single screw
Free air delivery: 13 m3/min
Working pressure: 8bar
Control: Touch screen PLC
Driven: direct
Cooling: by air
Starting method: Frequency conversion start
Inverter brand: Inovance
Lubricating water volume: 120 liters
Electric motor: 100hp 75KW 380v/50hz/3ph,IP55
Discharge temperature: less than ambient +8 ºC
Noise: less than 73 dB(A)
Air outlet size: G2"
Dimension: 2160*1600*1900mm
Weight: 2250kg
Oil-free frequency conversion screw air compressor:
1. The permanent magnet motor adopts high-efficiency rare-earth magnets, which does not lose magnetism at 180°C and has a long service life; it saves about 6% to 7% of energy compared with ordinary variable frequency motors;The highest efficiency can be exerted in a wider range, making the air compressor more energy-efficient.
2. Constant pressure control: It can realize high-precision constant pressure control with pressure fluctuation range of 0.01MPa;
3. Variable frequency soft start: Eliminate the peak current during starting, avoid grid impact, avoid current impact through step-by-step speed adjustment, and improve flexibility.
4. Eliminate no-load: The compressor can eliminate no-load during operation and reduce ineffective energy consumption;
5.High-performance vector control: low-frequency starting torque is large, and running current is small; ensuring the minimum temperature rise of the motor within a wide speed range.Get a reasonable torque to drive the air compressor to run smoothly;
Technical parameter
| Model | Air Delivery (m3/min) | Power (kW) | Lubricating water amount (Liters) | Cooling water amount T/Hour | Cooling water inlet/outlet diameter | Noise dB(A) | Outlet diameter | Dimension (mm) | ||
| 8 bar | 10 Bar | 12.5 bar | L*W*H | |||||||
| RW-08A/W | 1.17 | 1.05 | 0.81 | 7.5 | 10 | 2.0 | 3/4" | 58 | 3/4" | 800*800*1200 |
| RW-11A/W | 1.65 | 1.42 | 1.10 | 11 | 26 | 2.5 | 1" | 60 | 3/4" | 1150*755*1340 |
| RW-15A/W | 2.43 | 2.17 | 1.80 | 15 | 26 | 3.5 | 1" | 63 | 3/4" | 1150*755*1340 |
| RW-18A/W | 3.13 | 2.82 | 2.05 | 18.5 | 30 | 4.0 | 1" | 65 | 1" | 1400*900*1450 |
| RW-22A/W | 3.52 | 3.21 | 2.78 | 22 | 30 | 5.0 | 1" | 65 | 1" | 1400*900*1450 |
| RW-30A/W | 5.12 | 4.43 | 3.63 | 30 | 40 | 7.0 | 1 1/2" | 67 | 1 1/4" | 1550*1150*1550(A) 1500*1150*1300(W) |
| RW-37A/W | 6.30 | 5.33 | 4.77 | 37 | 40 | 9.0 | 1 1/2" | 67 | 1 1/4" | 1550*1150*1550(A) 1500*1150*1300(W) |
| RW-45A/W | 7.40 | 6.30 | 5.56 | 45 | 90 | 10.0 | 1 1/2" | 68 | 2" | 1980*1300*1760(A) 1800*1300*1670(W) |
| RW-55A/W | 9.60 | 8.55 | 7.67 | 55 | 120 | 12.0 | 1 1/2" | 70 | 2" | 1980*1300*1760(A) 1800*1300*1670(W) |
| RW-75A/W | 13.00 | 11.50 | 9.70 | 75 | 120 | 18.0 | 1 1/2" | 73 | 2" | 2100*1600*1900(A) 2200*1500*1800(W) |
| RW-90A/W | 14.80 | 13.90 | 12.60 | 90 | 180 | 20.0 | 1 1/2" | 73 | 2 1/2" | 2400*1600*2000(A) 2200*1500*1800(W) |
| RW-110A/W | 19.85 | 16.66 | 15.56 | 110 | 180 | 24.0 | 2" | 78 | 2 1/2" | 3000*1700*2250(A) 2200*1500*1800(W) |
| RW-132A/W | 23.10 | 19.97 | 16.90 | 132 | 240 | 30.0 | 2" | 78 | 2 1/2" | 3000*1700*2250(A) 2200*1500*1800(W) |
| RW-160W | 28.11 | 25.45 | 22.52 | 160 | 240 | 35.0 | 3H | 80 | DN80 | 2700*2800*2050 |
| RW-185W | 33.97 | 29.00 | 25.21 | 185 | 300 | 38.0 | 3" | 80 | DN80 | 2700*2800*2050 |
| RW-200W | 36.75 | 32.78 | 29.24 | 200 | 300 | 42.0 | 4" | 80 | DN100 | 2700*2800*2050 |
| RW-220W | 39.67 | 36.75 | 29.63 | 220 | 360 | 47.0 | 4" | 80 | DN100 | 2700*2800*2050 |
| RW-250W | 43.50 | 39.30 | 34.00 | 250 | 360 | 58.0 | 4" | 80 | DN100 | 2700*2800*2050 |
| Note:" A" means air cooling," W" means water cooling. | ||||||||||
Shanghai Rocky Machinery Co., Ltd. is a company dedicated to the production and research and development of various gas compression equipment. The company was established in 2012 and has a total of 5 licensed technical engineers. Mainly engaged in air, nitrogen, CO2 and other special gas compression equipment and after-treat equipment. With the development in recent years, the company has established a foreign trade team in Shanghai, and hired foreign trade consultants with 10 years of industry experience to better serve customers worldwide. With excellent quality and the support of 30 distributors worldwide, our annual sales in 2018 exceeded 5 million US dollars. We look forward to working with you to create a better tomorrow!
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of Taicang,Jiangsu,China. More than 18 years of experience in air compressor manufacturing.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
){kind=link}